USING THE XCARD
The crossover functions are controlled through the use of an XCard and can be set for high-pass, low-pass or full
range operation. The XCard shipped with your amplifier is set for Full Range. Each crossover card has two faces:
one face operates Full Range, the other has arrows to indicate the edge for selecting HP (high-pass) or LP (low-
pass) operation. Orient the card with the desired operating edge, indicated by the arrow, toward the socket
terminals inside the amplifier. Firmly, but carefully, plug the card into the socket.
CUSTOMIZING THE XCARD
7234
f
o
3386
f
o
= R (in kΩ) for .047µf cap
= R (in kΩ) for .022µf cap
Crossover Card
High Pass
Low Pass
Full Range
R1
R2
R1
R2
FULL
1
2πf
o
c
The crossover point can be altered by changing the 4 resistor values. Use the following formula to select the
appropriate resistor value to be placed on the XCard.
Low-Pass Full RangeHigh-Pass
FULL
↕
HP
➝
➝
LP
HP
➝
➝
LP
The actual formula is: R =
Where: R = Ω
f
o
= desired crossover frequency
c = capacitor in farads
ex: .047 x 10
-6
for .047mf cap
a
d
v
a
n
c
e
d
O
p
e
r
a
t
i
o
n
– 14 –
Commentaires sur ces manuels